products available
Damp Proofing & Tanking Products
Soudagum Hydro Waterproofing Polymer
Revolutionary waterproofing membrane based on hybrid polymer technology, with superb adhesion to most substrates; excellent resistance to UV, weather, and chemicals; and absolutely water-proof.
- Based on Soudal’s SMX Hybrid Polymer Technology
- Low viscosity – easy to apply with brush
- Solvent-free, isocyanate-free
- Good crack-bridging
- Paintable
- Superb UV and weather resistance
Soudagum Hydro is a one-component, solvent-free waterproofing product for horizontal and vertical surfaces.
- Technical Information:
- Base: Silane-terminated polymer
- Consistency: Grey low-viscous material
- Curing System: Moisture curing
- Specific Gravity: (DIN 53479) 1.51 g/mL
- Skin Formation Time: * 20 – 40 min
- Curing Time: * Ca. 3h. (1 mm layer)
- Application temperature From: +5°C to +40°C
- Shore A hardness: (ISO 868) 25 – 30
- Change in volume: (ISO 10563) < 3%
- Elongation at break: (ISO 37 rod 1) 280 – 380 %
- Tensile Strength: (ISO 37 rod 1) 1.0 – 1.2 N/mm²
- Tensile Strength: 100% (ISO 37 rod 1) 0.6 – 0.7 N/mm²
- Water permeability: (DIN 1048) Watertight
- Walkability: P2 (moderate)
- Temperature resistance From: -40 °C tot +80°C
- Consumption: Ca. 1,4 kg/m² (1 mm thickness) to 2,0 kg/m² (2mm thickness)
- These values may vary according to ambient conditions such as temperature, humidity, substrate etc.
Prices shown are excluding vat | show prices including vat
Additional Information
There are no additional documents available for this product.
